Безплатна доставка до магазинПо Спиди над 45 €
Безплатна консултацияПо код или по задача
Поръчай онлайн, вземи днесНаличност по град
Лесно връщане14 дни
Към продукта

Документи и подобни

Технически характеристики

38579
Код38579

Цифров двуканален  осцилоскоп с цветен дисплей и памет.

Technical Data DQ3062
BANDWIDTH 60MHz
REAL TIME SAMPLE RATE 250MS/s
DISPLAY 3.8 inch color display with TFT panel(320x240 pixels)
ACQUISITION MODE Normal, Peak detect, Averaging
INPUT
Input coupling DC, AC
Input impedance 1M±2% in parallel with 20pF±3pF
Probe attenuation factors 1x, 10x, 100x, 1000x
Max. input voltage 400V(PK-PK) CATII
HORIZONTAL SYSTEM
Saming range 10S/s~250MS/s
Recoord length Max. 6K points
Time base range 5ns/div~50s/div(step as 1~2.5~5)
Time base accuracy 100ppm 400V (DC + ACp-p)
VERTICAL SYSTEM
Resolution 8 bits
Sensitivity 5mV/div~5V/div (input to BNC)
Position range ±2V (5mV~200mV)
Single bandwidth Full bandwidth
LF Respong(AC, -3dB) ≥5Hz( to BNC)
Rising time(typical on BNC) ≤17.5 ns
DC gain accuracy ±5%
TRIGGER
Trigger Modes AUTO, NORM, Single, Edge, Video
Trigger sensitivity DC coupling: CH1 and CH2: 1div(DC~25M)
AC coupling: CH1 and CH2: 1div(50Hz~full bandwidth)
Trigger level range ±6 divisions from center screen
Trigger level accuracy ±0.3 divisions
Trigger sensitivity(Video) 2 div(PK-PK)
Line/field frequency(Video) Support NTSC, PAL and SECAM
MEASUREMENT SYSTEM
Cursors measurement ΔV, ΔT
Automatic measurement PK-PK, Averaging, RMS, Frequency, Circle
Waveform math +, -, x, ÷
Waveform storage 4 waveforms, 4 settings
Lissajou's figure Available
PROBE
Bandwidth DC~full bandwidth(10x)
Attenuation rate 10:1 (10x)
Compensate range 10pf~35pf
Input impedance 1M±2%
Input capacitance 14.5pf~17.5pf
Input voltage 300V DC
ADPATER
Output current 8.5V DC 1500mA
LI-ION BATTERY POWER SUPPLY 7.4V, 3500mA
DIGITAL MULTIMETER CHARACTERISTS
Input impdeance 10M
Voltage VDC: 400mV, 4V, 400V:±(1%+1 digit)
Max. input: DC 400V
VAC: 4V, 40V, 400V: ±(1%+3 digits)
Fuequency: 40Hz~400Hz
Max.input: AC 400V(virtual value)
Current 20A:±(3%+3 digits)
20A:±(5%+3 digits)
Impedance 400:±(1%+3 digits) 4K, 40K, 400K, 4M:±(1%+1 digit)
40M:±(1.5%+3 digits)
Capacitance 51.2nF~100uF:±(3%+3 digits)
Diode 0V~1.5V
On/off measurement <50(±30) beeping
ACCESSORIES Two probes, two multimeter leads, current measurement extend module, probe adjust pen, small capacitance mesurement module, USB cable(RS232 optional), adapter

Описание

Цифров двуканален осцилоскоп с цветен дисплей и памет. Technical Data DQ3062 BANDWIDTH 60MHz REAL TIME SAMPLE RATE 250MS/s DISPLAY 3.8 inch color display with TFT panel(320x240 pixels) ACQUISITION MODE Normal, Peak detect, Averaging INPUT Input coupling DC, AC Input impedance 1M&plusmn;2% in parallel with 20pF&plusmn;3pF Probe attenuation factors 1x, 10x, 100x, 1000x Max. input voltage 400V(PK-PK) CATII HORIZONTAL SYSTEM Saming range 10S/s~250MS/s Recoord length Max. 6K points Time base range 5ns/div~50s/div(step as 1~2.5~5) Time base accuracy 100ppm 400V (DC + ACp-p) VERTICAL SYSTEM Resolution 8 bits Sensitivity 5mV/div~5V/div (input to BNC) Position range &plusmn;2V (5mV~200mV) Single bandwidth Full bandwidth LF Respong(AC, -3dB) &ge;5Hz( to BNC) Rising time(typical on BNC) &le;17.5 ns DC gain accuracy &plusmn;5% TRIGGER Trigger Modes AUTO, NORM, Single, Edge, Video Trigger sensitivity DC coupling: CH1 and CH2: 1div(DC~25M) AC coupling: CH1 and CH2: 1div(50Hz~full bandwidth) Trigger level range &plusmn;6 divisions from center screen Trigger level accuracy &plusmn;0.3 divisions Trigger sensitivity(Video) 2 div(PK-PK) Line/field frequency(Video) Support NTSC, PAL and SECAM MEASUREMENT SYSTEM Cursors measurement &Delta;V, &Delta;T Automatic measurement PK-PK, Averaging, RMS, Frequency, Circle Waveform math +, -, x, &divide; Waveform storage 4 waveforms, 4 settings Lissajou's figure Available PROBE Bandwidth DC~full bandwidth(10x) Attenuation rate 10:1 (10x) Compensate range 10pf~35pf Input impedance 1M&plusmn;2% Input capacitance 14.5pf~17.5pf Input voltage 300V DC ADPATER Output current 8.5V DC 1500mA LI-ION BATTERY POWER SUPPLY 7.4V, 3500mA DIGITAL MULTIMETER CHARACTERISTS Input impdeance 10M Voltage VDC: 400mV, 4V, 400V:&plusmn;(1%+1 digit) Max. input: DC 400V VAC: 4V, 40V, 400V: &plusmn;(1%+3 digits) Fuequency: 40Hz~400Hz Max.input: AC 400V(virtual value) Current 20A:&plusmn;(3%+3 digits) 20A:&plusmn;(5%+3 digits) Impedance 400:&plusmn;(1%+3 digits) 4K, 40K, 400K, 4M:&plusmn;(1%+1 digit) 40M:&plusmn;(1.5%+3 digits) Capacitance 51.2nF~100uF:&plusmn;(3%+3 digits) Diode 0V~1.5V On/off measurement &lt;50(&plusmn;30) beeping ACCESSORIES Two probes, two multimeter leads, current measurement extend module, probe adjust pen, small capacitance mesurement module, USB cable(RS232 optional), adapter

Click & collect

Наличност в магазини

Склад 0 бр. · магазини 0 бр.

Карта
Асеновград ул. Цар Иван Асен II 34изчерпан
Благоевград ул. Димитър Йосифов №1изчерпан
Бургас ул. Христо Ботев 14изчерпан
Бяла ул. Стефан Стамболов 42изчерпан
Варна ул. Дрин №13изчерпан
Варна ул. Мир №35 Визчерпан
Въпроси

Отзиви и въпроси

Трябва да сте влезли в профила си за да коментирате!

864,08 €Няма в наличност